 |
Publisher: Peytchinski Publishing Ltd.
ISSN: 1312-773X (Online)
Issue: 2021, vol. 27, issue2
Subject Area: Dental Medicine
-
DOI: 10.5272/jimab.2021272.3723
Published online: 11 May 2021
Review article
J of IMAB. 2021 Apr-Jun;27(2):3723-3730
BASIC PROBLEMS WITH THE USE OF RESILIENT DENTURE LINING MATERIALS: LITERATURE REVIEW
Mariana Yankova1
, Todor Peev2, Bozhidar Yordanov1,
1) Department of Prosthetic Dental Medicine, Faculty of Dental Medicine, Medical University – Sofia, Bulgaria.
2) Private Practice, Sofia, Bulgaria.
ABSTRACT:
Complicated cases in the treatment of totally edentulous patients, as well as in the fabrication of obturators and epitheses, require the use of resilient lining materials (RLMs). These materials have several disadvantages, which is why many dental practitioners do not recommend them. The tendency to breaking the bond between the hard acrylic resin and the resilient liner is a fact with unpleasant consequences, mainly found with the use of cold-curing silicone-based resilient liners. Methods to improve the bond between the hard denture base and the RLM have been the subject of numerous publications. The efforts of the authors are focused in two directions: mechanical or chemical treatment of the denture base or a combination of both. Other commonly discussed problems with the use of RLMs are the difficult and even impossible repair and the retention of oral fluids, fungi and other microorganisms due to the porosity of RLMs. Despite the wide variety of tools offered by different manufacturers, the issue of optimal and high-quality mechanical treatment of the polymerized resilient material has not yet been fully resolved.
Keywords: resilient denture lining materials, two-layer denture, basic problems, bond, fracture,
- Download FULL TEXT /PDF 3950 KB/
Please cite this article as: Yankova M, Peev T, Yordanov B. Basic Problems with the Use of Resilient Denture Lining Materials: Literature Review. J of IMAB. 2021 Apr-Jun;27(1):3723-3730. DOI: 10.5272/jimab.2021272.3723
Correspondence to: Dr Mariana Yankova, PhD, Department of Prosthetic Dental Medicine, Faculty of Dental Medicine, Medical University – Sofia; 1, St. G. Sofiiski Blvd., Sofia, Bulgaria; E-mail: marianayankova13@gmail.com
REFERENCES:
1. Grant AA, Heath JR, McCord JF. Complete prosthodontics – problems, diagnosis and management. Wolfe;1994:123-125.
2. Basker RM, Davenport JC. Thomason JM. Prosthetic Treatment of the Edentulous Patient. Blackwell Publishing Company, Fifth edition. 2011:214-218, 224-226, 228-244.
3. Wright PS, Young KA, Riggs PD, Parker S, Kalachandra S. Evaluating the effect of soft lining materials on the growth of yeast. J Prosthetic Dentistry. 1998 Apr;79(4):404-9. [PubMed]
4. Wright PS. Observations on long-term use of a soft-lining material for mandibular complete dentures. J Prosthet Dent. 1994 Oct;72(4):385-92. [PubMed]
5. Lima JBG, Orsi IA, Borie E, Lima JH, Noritomi PY. Analysis of stress on mucosa and basal bone underlying complete dentures with different reliner material thicknesses: a three-dimensional finite element study. J Oral Rehabil. 2013 Oct;40(10):767-73. [PubMed]
6. Balch JH, Smith PD, Marin MA, Cagna DR. Reinforcement of a mandibular complete denture with internal metal framework. J Prosthet Dent. 2013 Mar;109(3):202-5. [PubMed]
7. Hatamleh MM, Maryan CJ, Silikas N, Watts DC. Effect of Net Fiber Reinforcement Surface Treatment on Soft Denture Liner Retention and Longevity. J Prosthodont. 2010 Jun;19(4):258-62. [PubMed]
8. Lassila LV, Mutluay MM, Tezvergil-Mutluay A, Vallittu PK. Bond strength of soft liners to fiber-reinforced denture-base resin. J Prosthodont. 2010 Dec;19(8):620-4. [PubMed]
9. Narva KK, Lassila LV, Vallittu PK. The static strength and modulus of fiber reinforced denture base polymer. Dent Mater. 2005 May;21(5):421-8. [PubMed]
10. Vallittu PK. A Review of Fiber-Reinforced Denture Base Resins. J Prosthodont. 1996 Dec;5(4):270-6. [PubMed]
11. Vergani CE, Seo RS, Pavarina AC, dos Santos Nunes Reis JM. Flexural strength of autopolymerizing denture reline resins with microwave post-polymerization treatment. J Prosthet Dent. 2005 Jun;93(6):577-83. [PubMed]
12. Machado AL, Giampaolo ET, Pavarina AC,& Jorge JH, Vergani CE. Surface roughness of denture base and reline materials after disinfection by immersion in chlorhexidine or microwave irradiation. Gerodontology. 2012 Jun;29(2):e375-82. [PubMed]
13. Otto D. [Klinische und experimentelle Untersuchungen weichbleibender und harter Unterfütterungskunststoffe] [dissertation]. [in German], Medizinischen Fakultät der Friedrich-Schiller-Universität Jena. 2004. [Internet]
14. Аnastasov I. [Dental material science.] [in Bulgariаn] Sofia Smile Center Publishing House, Sofia. 2013:159-161.
15. Gupta S. Effect of Surface Treatment on the Flexural Strength of Denture Base Resin and Tensile Strength of Autopolymerizing Silicone Based Denture Liner Bonded to Denture Base Resin: An In Vitro Study. J Indian Prosthodont Soc. 2010 Dec;10(4):208-12. [PubMed]
16. Kulak-Ozkan Y, Sertgoz A, Gedik H. Effect of thermocycling on tensile bond strength of six silicone-based, resilient denture liners. J Prosthetic Dent. 2003 Mar;89(3):303-10. [PubMed]
17. Maeda T, Hong G, Sadamori S, Hamada T, Akagawa Y. Durability of peel bond of resilient denture liners to acrylic denture base resin. J Prosthodont Res. 2012 Apr;56(2):136-41. [PubMed]
18. Demir H, Dogan A, Dogan OM, Keskin S, Bolayir G, Soygun K. Peel Bond Strength of Two Silicone Soft Liners to a Heat-cured Denture Base Resin. J Adhes Dent. 2011;13(6):579-584. [PubMed]
19. Korkmaz FM, Bagis B, Ozcan M, Durkan R, Turgut S, Ates SM. Peel strength of denture liner to PMMA and polyamide: laser versus air-abrasion. J Adv Prosthodont. 2013 Aug;5(3):287-295. [PubMed]
20. Sertgöz A, Kulak Y, Gedik H, Taskonak B. The effect of thermocycling on peel strength of six soft lining materials. J Oral Rehabil. 2002 Jun;29(6):583-7. [PubMed].
21. Więckiewicz W, Kasperski J, Więckiewicz M, Miernik M, Krуl W. The adhesion of modern soft relining materials to acrylic dentures. Adv Clin Exp Med. 2014 Jul-Aug;23(4):621-5. [PubMed]
22. Marcotte H, Lavoie MC. Oral microbial ecology and the role of salivary immunoglobulin A. Microbiol Mol Biol Rev. 1998 Mar;62(1):71-109. [PubMed]
23. Lau M, Amarnath GS, Muddugangadhar BC, Swetha MU, Das KA. Tensile and shear bond strength of hard and soft denture relining materials to the conventional heat cured acrylic denture base resin: An In-vitro study. J Int Oral Health. 2014 Apr;6(2):55-61. [PubMed]
24. Muralidhar G, Satish Babu CL, Shetty S. Integrity of the interface between denture base and soft liner:A scanning electron microscopic study. J Indian Prosthodont Soc. 2012 Jun;12(2):72-7. [PubMed]
25. Al-Athel MS, Jagger RG. Effect of test method on the bond strength of a silicone resilient denture lining material. J Prosthet Dent. 1996 Nov;76(5):535-40. [PubMed]
26. Zhang F, Shi L, Deng L, Zhang L, Zeng Y, Tu T. [Effect of different polymerization methods on shear bond strength between polymethyl methacrylate and silicone soft liner]. [in Chinese] Hua Xi Kou Qiang Yi Xue Za Zhi. 2014 Jun;32(3):292-6. [PubMed]
27. Pajukoski H, Meurman JH, Snellman-Grohn S, Keinanen S, Sulkava R. Salivary flow and composition in elderly patients referred to an acute care geriatric ward. Oral Surg Oral Med Oral Pathol Oral Radiol Endod. 1997 Sep;84(3):265-271. [PubMed]
28. Kazanji MN, Abid Al-Kadder AA. Evaluation of the bond strength of three soft lining materials to acrylic resin denture base. Al–Rafidain Dent J. 2012; 12(1):57-65.
29. Arafa KAO. Effect of Soft Liner Material on Retention of Complete Denture, (An In Vitro Study) Life Sci J. 2012; 9(2):1296-99. [Crossref]
30. Jacobsen NL, Mitchell DL, Johnson DL, Holt RA. Lased and sandblasted denture base surface preparations affecting resilient liner bonding. J Prosthet Dent. 1997 Aug;78(2):153-8.. [PubMed]
31. Kulkarni RS, Parkhedkar R. The effect of denture base surface pretreatments on bond strengths of two long term resilient liners. J Adv Prosthodont. 2011 Mar;3(1):16-9. [PubMed]
32. Surapaneni H, Ariga P, Haribabu R, Ravi Shankar Y, Kumar VHC, Attili S. Comparative evaluation of tensile bond strength between silicon Soft liners and processed denture base resin conditioned by three modes of surface treatment: An in vitro study. J Indian Prosthodont Soc. 2013 Sep;13(3):274-80. [PubMed]
33. Vallittu PK, Lassila VP, Lappalainen R. Wetting the repair surface with methyl methacrylate affects the transverse strength of repaired heat-polymerized resin. J Prosthet Dent. 1994 Dec;72(6):639-43. [PubMed]
34. Atsü S, Keskin Y. Effect of silica coating and silane surface treatment on the bond strength of soft denture liner to denture base material. J Appl Oral Sci. 2013 Jul-Aug;21(4):300-6. [PubMed]
35. Hristov I, Pavlov B, Ivanova D, Georgieva I. A comparative study on the bonding strength between the denture base and the relining marerials. J of IMAB. 2006; 12(2):28-29. [Internet].
36. Minami H, Suzuki S, Ohashi H, Kurashige H, Tanaka T. Effect of surface treatment on the bonding of an autopolymerizing soft denture liner to a denture base resin. Int J Prosthodont. 2004 May-Jun;17(3):297-301. [PubMed]
37. Aras MA, Nagarsekar A. Evaluation of the effect of denture base surface treatment on tensile bond strength of RTV silicone soft denture liners. J Indian Dent Assoc. 2013; 7(1):20-25.
38. Akin H, Tugut F, Mutaf B, Akin G, Ozdemir AK. Effect of different surface treatments on tensile bond strength of silicone-based soft denture liner. LasersMed Sci. 2011 Nov;26(6):783-8. [PubMed]
39. Tugut F, Akin H, Mutaf B, Akin GE, Ozdemir AK. Strength of the bond between a silicone lining material and denture resin after Er:YAG laser treatments with different pulse durations and levels of energy. LasersMed Sci.2012 Mar;27(2):281-5. [PubMed]
40. Demir H, Soygun K, Dogan A, Keskin S, Dogan OM, Bolayir G. Effect of Maleic Anhydride Pretreatment on Tensile Bond Strength of a Silicone Soft Liner to a Denture Base Polymer. J Adhes Dent. 2011 Oct;13(5):481-7. [PubMed].
41. Hristov Il. [Up-to-date analysis of soft rebasing materials and ways to address their shortcomings.] [disertation] MU-Plovdiv. 2017. pp.106-116. [in Bulgarian]
42. Khanna A, Bhatnagar VM, Karani JT, Madria K, Mistry S. A Comparative Evaluation of Shear Bond Strength Between Two Commercially Available Heat Cured Resilient Liners and Denture Base Resin with Different Surface Treatments. J Clin Diagn Res. 2015 May;9(5):ZC30-4. [PubMed]
43. Pesun IJ, Hodges J, Lai JH. Effect of finishing and polishing procedures on the gap width between a denture base resin and two long-term, resilient denture liners. J Prosthet Dent. 2002 Mar;87(3):311-8. [PubMed]
44. Hadjieva H, Dimova M, Todorov S. Stomatitis prosthetica – A polyetiologic disorder. J of IMAB. 2006; 12(2):38-41. [Internet ]
45. Dimova M, Hadjieva H. Total prosthetics in function. J of IMAB. 2006; 12(2):42-44. [Internet]
46. Hadjieva H, Dimova M, Krasteva A, Petrov T. Clinical Case of Allergic Contact Occupational Dermatitis Caused by Methyl methacrylate Monomer. J of IMAB. 2006; 12(2):35-37. [Internet]
47. Hadjieva H, Dimova M. Selective Pressure Impression Methods for Total Dentures by Patients with Loose and Hypermobile Mucosa on the Alveolar Ridges. J of IMAB. 2005; 11(2):51-53. [Internet].
Received: 14 May 2020
Published online: 11 May 2021